• Opis / Specifikacije
• Order sample / quote

• Made from Polyethylene (Ld-PE) (03)
• Colour: grey
• Simple but effective insert foot for furniture and other constructions
• Prevents sliding and absorbs vibrations

Dimenzije
A	4.7
B	10
C	12
D	7
E
F	F1
Osnovne informacije
Materijal	Polyethylene (Ld-PE)
Boja	gray

---

Colour: Colour number: grey 002 XXX XXXX XXXXX Colour definition : squirrel grey Matches : Reasonably matches RAL colour 7000. Featured colours reserved. Due to the screen differences in colour may occur. Material: Material number: Polyethylene (Ld-Pe) 03 XXX XXXX XXXXX Product information Low density polyethylene is resistant to many chemicals. Therefore especially suitable for coverplugs and caps. Because of great flexibility it is almost unbreakable. Does not take in moisture and therefore very suitable for electrical insulation. Polyethylene can not be glued, burns after lighting it and may discolour and becomes brittle after exposure to direct sunlight. Physical information Property Value DIN Relative density (gr/cm³) 0.92 -- Tensile strength (MN/m²) 10 53455 Elongation at break (%) 300 53455 Tensile modulus (MN/m²) 180 53457 Notched impact strength (kJ/m²) -- 53453 Ball indentation (MN/m²) 14 53456 Application temperature (max ºC) 70 -- Volume resistivity (Ohm.cm) 10^17 53482 Dissapation factor tan. (10³ Hz) 0.0003 53483 Dielectric strength (MV/m) 60 53481 Coefficient of friction (on steel) (--) 0.17-1.5 -- Chemical resistance Resistant to   Petrol A Benzene A Mineral oils A Vegetable oils A Weak alkalis A Strong alkalis A Weak acids A Strong acids B   A = Good   B = Doubtful   C = Poor All information is given in good faith but without warranty

---

Name:

E-mail:

Phone:

SKU:

Comment:

Insert foot [068] (068010000203)

• Model: 068010000203

• 0,2217€

• ---

• 500za %s ili više artikala %s po artiklu0,2217€
• 1000za %s ili više artikala %s po artiklu0,1712€